To make or break a connection with a remote system, click here.
Close this window and don't save changes.
This is used to configure your modem. For help with modem strings, consult the manual that came with your modem.
This is the number that will be dialed. To use pulse dialing, type 'ATDP' before the phone number.
Click here to limit the connection time for people calling in.
This copy of NetLink Remote is unregistered. If you would like to use NetLink Remote for more than 10 minutes, please register your copy.
Click here to remove the time limit for people calling in.
This is the time limit when someone else initiates the connection. It is only in effect if the Max Connection Time box is checked.
Click here to have NetLink Remote answer the phone and connect when it rings.
Click here to prevent NetLink from answering the phone automatically.
To have NetLink dial when the Connect button is pressed, click here. Currently, it will wait for a call if the connect button is pressed.
When the Connect button is pressed, NetLink Remote will dial the number in the above. To answer, uncheck this.
If you would like NetLink to try to connect when your computer is starting up, check this.
This is only avaiable if your computer is set to initiate the connection. Use the above checkbox to enable this option.
NetLink is set to try to establish a connection during the startup process. If you do not wich NetLink to do this, uncheck this.
Use this to select the speed at which your computer communicates with your modem. This should be equal to or greater than the speed you intend to connect at.
Use this to select the serial port that your modem is attached to. If you are using a Macintosh Powerbook, select the modem port.
Click here to close this window and save the current settings.
